Samsung NP-X22 - Page 76

75
5
 ClickGeneraltabandselectaLANdriverfrom
Connect using:.SelectInternet Protocol(TCP/IP)
andclickProperties.
Note
ThedisplayedLANdrivermayvarydependingon
theLANdevicetype.
Click
Install to add a network component as shown
inthegurebelow:Youcanaddaclient,aservice,
oraprotocol.
6
 CongureIPsettings.
SelectObtain an IP address automatically when
usingDHCP.IfyouuseastaticIP,selectUse the
following IP addressandenterthevalues.
Note
IftheIPofyourcomputerisnotautomatically
assigned,contactthenetworkadministrator.
7
 Ifallsettingsaremade,clickOK.Nowthenetwork
congurationisnished.