Samsung NP-X360 - Reinstalling Software

162
Reconguring the TPM Chip
To re-use an initialized TPM chip, you have to recongure
it to the available status.
1
Restart the system and press the <F2> key several
times when the Samsung logo appears.
2
When the BIOS screen appears, press the → key to
move to the Security menu.
Then press the ↓ key to move to the TPM Support
item and set it to Enable.
3
Press the → key to move to the TPM State, press
the ↓ key to move to the Change TPM State item,
and press <Enter>.
4
Press the ↓ key to move to the Enable & Activate
item and press <Enter>.
5
Press the <F10> key and if the Setup Conrmation
window appears, select Yes and press <Enter>.
6
The system is restarted.
To use the TPM chip, you can initialize the Security
Platform.