Why does the display go blank on my Samsung NSG6DG8300SR?
If the display on your Samsung Ranges goes blank, replace the fuse or reset the circuit breaker. The electrical outlet Ground Fault Interrupter (GFI or GFCI) may have been tripped and needs to be reset, or your digital control has been damaged.
Why Samsung NSG6DG8300SR oven door will not open after a self-cleaning cycle?
If the oven door on your Samsung Ranges will not open after a self-cleaning cycle, this is normal. The oven door will remain locked until the oven temperature drops below 400 °F.
Why does my Samsung NSG6DG8300SR surface burner click during operation?
If your Samsung Ranges surface burner clicks during operation, turn the control knob to a desired setting after the burner lights. If the burner continues to click, contact a service technician.
Why are the flames on my Samsung NSG6DG8300SR Ranges surface burner very large or yellow?
If the surface burners on your Samsung Ranges are producing very large or yellow flames, check the burner orifice size. Contact your installer if you have the wrong orifice (LP gas instead of natural gas or natural gas instead of LP gas).
Why is the oven fan making noise, or won't turn off on my Samsung Ranges Slide-In oven model?
This is normal. The cooling fan automatically shuts down when the oven cools.
General| Number of Burners | 5 |
|---|---|
| Self-Cleaning | Yes |
| Convection Oven | Yes |
| Color | Stainless Steel |
| Fuel Type | Gas |
| Width | 30 inches |
Crucial safety measure to prevent range tipping and injury.
Essential precautions for safe operation to prevent injury or damage.
Guidelines to prevent fires and handle fire emergencies effectively.
Procedures for safe gas handling and leak detection to prevent hazards.
Precautions for safe operation of the oven compartment.
Common problems related to gas leaks and burner operation.
To Next Page