English 27
Operations
Pyro cleaning
Pyrolytic features high temperature thermal cleaning. It burns off oily leftovers to
facilitate manual cleaning.
1. Remove all accessories including the
side racks, and wipe out large pieces
of impurities manually from inside the
oven. Otherwise, they may cause ames
during the cleaning cycle, resulting in
re.
2. Turn the mode selector to select
.
3. Turn the value dial to select Pyro
cleaning (C 2), and then press OK.
4. Turn the value dial to select a cleaning
time from 3 levels: 1 hr 50 min, 2 hr
10 min, and 2 hr 30 min.
5. Press OK to start cleaning.
6. When complete, wait until the oven
cools down, and then wipe the door
along its edges using a wet cloth.
CAUTION
• Do not touch the oven because the oven becomes very hot during the cycle.
• To avoid accidents, keep children away from the oven.
• After the cycle is complete, do not power off while the cooling fan is operating
to cool the oven down.
NOTE
• Once the cycle starts, the oven becomes hot inside. Then, the door will be
locked for safety. When the cycle is complete and the oven cools down, the
door will be unlocked.
• Make sure you empty the oven before cleaning. Accessories can be deformed
due to high temperatures inside the oven.
Timer
Timer helps you check the time or operating duration while cooking.
1. Press .
2. Turn the value dial to set the time, and
then press OK.
NOTE
• When the time has elapsed, the oven beeps with a blinking message of “00:00”
on the display.
• You can change the timer settings at any time.
Sound on/off
• To mute the sound, hold down for
3 seconds.
• To unmute the sound, hold down again
for 3 seconds.
NV75N5671RS_EU_DG68-01055C-01_EN+DE.indb 27 2018-02-14 6:17:21
To Next Page
Loading...
Need help?
General