Samsung NX2000 - Reducing the Red-Eye Effect; Adjusting the Flash Intensity

102
Shooting Functions > Flash
Adjusting the ash intensity
When the ash is on, adjust the ash intensity +/-2 levels.
To set the ash
intensity,
In Shooting mode, touch → Flash → an option →
→ Drag the slider or touch +/- to adjust the intensity →
touch
.
Flash : 0
Reducing the red-eye eect
If the ash res when you capture a photo of a person in the dark, a red
glow may appear in the eyes. To reduce the red-eye eect, select Auto
Red-eye or Fill-in Red.
Without red-eye reduction With red-eye reduction
If the subject is too far from the camera or moves when the rst ash res, red-
eyes may not be reduced.