ooting FunctionsShooting Functions
The camera automatically sets the exposure by measuring the levels of
light from the photo’s composition and the position of a subject. If the
exposure set by the camera is higher or lower than you expected, you can
adjust the exposure value manually. The exposure value is adjustable in ±3
increments. The camera displays the exposure warning in red for each step
beyond ±3 range.
To adjust the exposure value, press the command dial twice, and then
rotate it while the exposure value is selected. You can also adjust the
exposure value by touching
→
EV, and then dragging the dial on
the screen.
You can check the exposure value by the position of the exposure level
indicator.
Exposure level
indicator
Increased exposure
(brighter)
Decreased exposure
(darker)
Exposure warning
Standard exposure index
-2
Original
+2
Exposure compensation
To Next Page
Loading...
