Why is there steam or smoke coming from under the control panel of my Samsung NX58 560?
Steam or smoke coming from under the control panel is normal, as the oven vent is located there. More steam is visible when using convection functions or when baking or roasting multiple items.
Why is there excessive smoking during a self-cleaning cycle on my Samsung NX58 560 Ranges?
If there's excessive smoking during the self-cleaning cycle, especially the first time, it's typically normal. Wipe up any excessive soiling before starting. If the smoke persists, press the OFF/CLEAR pad and ventilate the room. Once cooled and unlocked, wipe up any remaining soil and reset for self-cleaning.
Why are my Samsung Ranges burners not burning evenly?
If your burners aren't burning evenly, it could be due to incorrectly assembled or unlevel surface burner components and caps. Also, dirty surface burners can cause uneven flames. Clean the surface burner components thoroughly.
Why is my Samsung Ranges not level?
If your range isn't level, it could be due to improper installation or damaged leveling legs. Ensure the floor is level, strong, and stable; contact a carpenter if it sags or slopes. Check and adjust the leveling legs. Additionally, misaligned kitchen cabinets can create the appearance of an unlevel range, so ensure cabinets are square and provide sufficient room for installation.
Why does my Samsung NX58 560 Ranges surface burner click during operation?
If a surface burner clicks during operation, it might be because the control knob has been left in the LITE position. After the burner lights, turn the control knob to the desired setting. If the clicking continues, it is recommended to contact a service technician.
How to fix surface burners that do not light on Samsung NX58 560?
If the surface burners on your Samsung Ranges aren't lighting, make sure the control knob is properly set by pushing it in and turning it to the LITE position. Also, check that the burner caps are correctly placed and the burner base is aligned. Clean the electrodes if necessary, and ensure all parts are correctly positioned.
Why is food not baking or roasting properly in my Samsung NX58 560 Ranges oven?
If food isn't baking or roasting properly, several factors could be at play. Ensure the correct cooking mode is selected. Verify that the oven racks are positioned properly for the food being cooked. Use appropriate cookware of the correct size. Check if the oven thermostat needs adjustment. Remove any aluminum foil from the racks or oven bottom. Make sure the clock or timers are set correctly.
Why is my Samsung NX58 560 Ranges oven smoking excessively during broiling?
Excessive smoke during broiling can occur for several reasons. Ensure meat or food is properly prepared by cutting away excess fat. Check that the top oven rack is correctly positioned. Verify that the controls are set correctly. Regular cleaning is necessary to prevent greasy buildup on oven surfaces, which can also cause smoking.
Why are my Samsung NX58 560 surface burners not lighting?
If the surface burners on your range aren't lighting, first make sure the control knob is correctly set by pushing it in and turning it to the LITE position. Also, check that the burner caps are properly placed and the burner base is correctly aligned. Cleaning the electrodes may also help.
What to do if my Samsung NX58 560 Ranges oven won't self-clean?
If your oven will not self-clean, several factors could be the reason. First, check if the oven door lock is activated; if so, hold the oven door open and press the START/SET pad for 3 seconds until the Lock icon turns off. Also, the self-clean function will not operate when the warming drawer is on, so ensure the warming drawer is off. If the oven is too hot, allow it to cool down before resetting the controls, as the door must lock before self-cleaning can start. Finally, make sure the self-cleaning oven controls are properly set.
General| Type | Freestanding |
|---|---|
| Fuel Type | Gas |
| Number of Burners | 5 |
| Self-Cleaning | Yes |
| Convection Oven | Yes |
| Color | Stainless Steel |
Highlights new features, capacity, and cooktop configuration.
Identifies appliance parts and components with diagrams.
Covers general hazards, symbols, and basic precautions.
Specific safety procedures for gas detection and usage.
Covers electrical requirements, grounding, and installation safety.
How to use cooktop burners, griddle, and cookware.
Explains oven controls, baking, roasting, broiling, and special modes.
Instructions for using the warming drawer for food.
Guides on cleaning oven, cooktop, and exterior surfaces.
Provides solutions for common range problems and error codes.
Details the limited warranty for products sold in the US.
Details the limited warranty for products sold in Canada.
To Next Page