Samsung NX58 Series - User Manual

Questions and Answers

P
Paul MoralesSep 8, 2025
Why is there excessive smoking during a Self-Cleaning cycle in my Samsung NX58?
- D
  dustinstanleySep 8, 2025
  If your Samsung Ranges is smoking excessively during a self-cleaning cycle, especially the first time, this is normal. However, you can: * Wipe up excessive soil before starting the cycle. * If smoke persists, press the OVEN OFF pad and open windows to clear the smoke. After the oven cools and unlocks, wipe up any remaining soil and reset the oven for self-cleaning.
C
Cory DavisAug 23, 2025
What to do if all burners on my Samsung NX58 Ranges do not light?
- C
  Cassidy GarrisonAug 23, 2025
  If none of the burners on your Samsung Ranges are lighting, check the following: * Make sure the power cord is properly plugged into a live, grounded electrical outlet. * Check your home's fuse box or circuit breaker and replace the fuse or reset the breaker if needed. * Ensure the gas supply is properly connected and turned on. Refer to the Installation Instructions that came with your range for guidance.
D
Daniel HicksAug 25, 2025
What to do if my Samsung NX58 Ranges oven control beeps and displays an error code?
- A
  Andrea ThomasAug 25, 2025
  If your Samsung Ranges oven control is beeping and showing an error code, it indicates a function error. To resolve this: * Press the OVEN OFF pad and restart the oven. * If the problem continues, disconnect power to the range for at least 30 seconds, then reconnect it. * If the issue persists after these steps, it's best to call for service.
O
Olivia GonzalezAug 26, 2025
Why Samsung NX58 Ranges oven will not Self-Clean?
- S
  smalldanielAug 27, 2025
  Your Samsung Ranges oven might not start the self-clean cycle for a few reasons: * Check if the oven door lock is activated (the display will show a Lock icon). Hold the oven door open and press the START/SET pad for 3 seconds to deactivate it. * Ensure the warming drawer is not in use, as the self-clean function won't operate when the warming drawer is on. * If the oven is too hot, it won't lock the door to start the self-clean cycle. Allow the oven to cool down and then reset the controls. * Also, verify that the self-cleaning oven controls are properly set.
G
George JuarezAug 27, 2025
Why is my Samsung Ranges oven light not turning on?
- C
  Christopher BlairAug 27, 2025
  If the oven light in your Samsung Ranges isn't working, there are a few potential causes: * The oven door lock might be turned on. If the display shows the Lock icon, hold the oven door open and press the START/SET pad for 3 seconds to turn it off. * The Sabbath function could be activated. If 'SAb' and the time are displayed, press and hold the Clock and Timer On/Off pad simultaneously for 3 seconds to deactivate the Sabbath function and reactivate the light switch. * The bulb might be loose or burned out.
P
patricia64Sep 22, 2025
Why does the warming drawer or storage drawer not slide smoothly or drags on my Samsung Ranges?
- J
  jason69Sep 22, 2025
  If the warming drawer or storage drawer on your Samsung Ranges doesn't slide smoothly, it could be due to: * The drawer not being properly aligned with the roller guide rails or nylon drawer guides. Try removing and replacing the drawer. * The contents in the drawer being too heavy. Reduce the weight and/or redistribute the contents.
L
Linda HollandSep 16, 2025
Why do I hear a crackling or popping sound from my Samsung NX58 Ranges?
- L
  lori98Sep 16, 2025
  If you hear a crackling or popping sound coming from your Samsung Ranges, it's normal. This is just the sound of the metal heating and cooling during cooking or cleaning.
L
Loretta Rivers DVMSep 18, 2025
Why are the oven racks difficult to slide in my Samsung NX58?
- N
  Noah RobinsonSep 18, 2025
  Apply a small amount of vegetable oil to a paper towel and wipe the edges of the oven racks with the paper towel. Racks become dull and hard to slide when they are left in the oven during a self-clean cycle.
J
Jasmine HamiltonSep 7, 2025
Why Samsung Ranges oven door will not open after a Self-Cleaning cycle?
- N
  nicole84Sep 7, 2025
  If the oven door on your Samsung Ranges won't open after a self-cleaning cycle, don't worry—this is normal. The door will remain locked until the oven temperature drops below 392 °F.
C
Clinton RodriguezSep 4, 2025
Why do my Samsung NX58 surface burners click during operation?
- E
  Emily RichSep 4, 2025
  If your Samsung Ranges surface burners are clicking during operation, it might be because the control knob has been left in the LITE position. After the burner lights, turn the control knob to a desired setting. If the clicking continues, contact a service technician.