Samsung NX58H9950W Series User Manual (English)

Other manuals for Samsung NX58H9950W Series

Questions and Answers:

C
Carl HarrisAug 31, 2025
What to do if Samsung NX58H9950W Ranges oven will not self-clean?
- S
  Shawna CervantesAug 31, 2025
  If your Samsung oven isn't self-cleaning, consider the following possibilities: * Ensure the oven door lock is not engaged. The display will show the Lock icon. Hold the oven door open and press the START/SET button for 3 seconds. The oven will beep and the Lock icon will turn off. * Make sure the warming drawer is not in use, as the self-clean function won't operate when the warming drawer is on. * Allow the oven to cool down if it's too hot, and then reset the controls. The door must lock before the self-clean cycle can start. * Also, ensure the door is completely closed.
M
millergregoryAug 31, 2025
Why does my Samsung NX58H9950W Ranges surface burner keep clicking?
- M
  michellenguyenSep 1, 2025
  If your Samsung range's surface burner clicks during operation, it might be because the control knob has been left in the LITE position. After the burner lights, turn the control knob to a desired setting. If the burner still clicks, contact a service technician.
A
Amanda WeberSep 1, 2025
Why is my Samsung NX58H9950W oven smoking so much during self-clean?
- H
  heathercookSep 1, 2025
  Excessive smoking during a self-cleaning cycle is normal the first time the oven is cleaned. Wipe up all excessive soiling before starting the self-cleaning cycle. If smoke persists, press the OFF/CLEAR button. Open the windows to clear the smoke from the room. After the oven has cooled and unlocked, wipe up excessive soil and reset the oven for self-cleaning.
A
Angela FlynnSep 2, 2025
Why doesn't food bake or roast properly in my Samsung NX58H9950W Ranges oven?
- L
  lydiarichardsonSep 2, 2025
  If food isn't baking or roasting properly in your Samsung oven, check these potential causes: * Ensure the correct cooking mode is selected. * Verify the oven racks are positioned properly for the food you're cooking. * Confirm you're using the correct cookware of the proper size. * Remove any aluminum foil from the racks and/or oven bottom. * Make sure that clock or timers are set correctly.
K
Kyle BakerSep 3, 2025
What to do if Samsung NX58H9950W Ranges oven control beeps and displays a code?
- M
  Michael GarciaSep 3, 2025
  If your Samsung oven control is beeping and displaying an information code, press the OFF/CLEAR button and restart the oven. If the problem continues, disconnect all power to the range for at least 30 seconds and then reconnect the power. If this doesn't resolve the issue, call for service.
A
Andrew ShermanSep 13, 2025
Why is my Samsung NX58H9950W oven smoking excessively during broiling?