EasyManua.ls Logo

Samsung OfficeServ 7100 Series - Configuration of Slots

Samsung OfficeServ 7100 Series
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER 2. Ошибка! Используйте вкладку "Главная" для применения 제목 1, 제목 1 к тексту, который должен
здесь отображаться.
2-4
© SAMSUNG Electronics Co., Ltd.
2.2.1 Configuration of Slots
OfficeServ 7100 has three board slots. These boards are equipped with the following
boards depending on the configuration of OfficeServ:
Table 2.2 Boards that can be mounted on the slots
Cabinets
Slots
Mountable Boards
Main Control Part
Slot 0
MP10, MP10a, MP11
Subscriber Part
Slot 1 and Slot 2
TEPRIa, TEPRI2, 8TRK, 8SLI, 8SLI3, 8DLI, 8COMBO,
8COMBO3, 16SLI2, 16SLI3, 16MWSLI, 16DLI2, LIM,
UNI, MGI16, MGI64
Blank Board Function
Blank board is a dummy board that functions as a screen to prevent the system
from foreign materials when the Universal Slot is not equipped boards.
If an empty board is generated, use a blank board to vent internal air naturally.

Table of Contents

Related product manuals