© SAMSUNG Electronics Co., Ltd.
Page 137
ANNEX
!
If the caller ID received from the Telephone Company is corrupt, the caller ID will not be
displayed.
!
If the Telephone Company does not send a caller ID, the caller ID will not be displayed.
An alarm does not ring at the programmed time.
!
Check the current time is set on the ITP-5021D/5014D Phone correctly.
If the current time setting needs to be changed, contact your System Administrator.
!
Check if an alarm is set.
(Refer to ‘Setting Alarm Reminders’ in the ‘Application Menus’ section of this guide.)
To Next Page
Loading...
