© SAMSUNG Electronics Co., Ltd. Page 97
CONVENIENT FEATURES
Setting a Message Indication
You can leave a message indication when there is no answer or if the station required is busy.
1.
Press the
[Message]
button or dial
[4] [3]
.
2.
Hang up after hearing confirmation tone.
3.
The
[Message]
button of the receiving
station will flash. IP phones without the
[Message]
button will receive special
dial tone as a message indicator.
The status indicator will also flash red.
- You can leave up to 5 messages on a station.
NOTE
To Next Page
Loading...
