HOULD KNOW
Assigning the Programmable Button Extenders
By adding an extender to some buttons, you can use the IP Phone more conveniently. For example, if the
extender 4 is added to the [PAGE] button, when this button is pressed, it will allow a page announcement to
be made to stations in page zone 4. Refer to the following table to select the extenders that can be assigned
for each programmable button.
Button Description Extenders
BOSS Director/Secretary 1-4
DP Direct Call Pick-up Station or station group number
DS Direct Station Required station numbers
FWRD Call Forwarding
0=FWD Cancel, 1=FWD All, 2=FWD Busy,
3=FWD No Answer, 4 FWD Busy/No Answer,
5=FWD DND and-6=Follow Me
GPIK Group Call Pick-up 01-20
GCONF Conference group 1-5
IG Group In/Out Required station group 5XX(X)
MMPG Meet Me Page 0-9, *
PARK Park Orbits 0-9
PMSG Programmed Message 01-20
PAGE Paging 0-9, *
SG Station Group Selection 5XX(X)
SPD Speed Dial Personal 00-49, or System 500-999
DIR Directory Name Dialling PERS(1), SYS(2) or STN(3)
VT Voice Mail Transfer Voice Mail Group(5XX)
To Next Page
Loading...
