Page 102 © SAMSUNG Electronics Co., Ltd.
CONVENIENT FEATURES
Programmed Message List
When you are away for a certain period of time, you can leave a message of absence on stations by selecting
a message accordingly.
The caller will see the message and know that you are away.
Message code Message
01 GIVE ME THE CALL
02 TAKE A MESSAGE
03 ASK THEM TO HOLD
04 SEND TO MY VM
05 TRSF TO MY SECY
06 LEAVE A MESSAGE
07 PAGE ME
08 OUT OF TOWN
09 IN A MEETING
10 I WILL CALLBACK
11-15 Blank System Wide messages
16~20 Blank Message(You can set up)
- Your System Administrator can edit the first 15 Programmable Messages.
- Your personal Programmed Messages using the following procedure:
1. Press the [Transfer] button when your IP phone is in the idle condition.
2. Dial [1] [1] [5].
3. Select the Programmed Message you wish to insert or modify(e.g. 16).
4. Enter the characters required in accordance with the procedure below.
5. Press the [Transfer] button to save the information and set the Programmed
Message to your IP Phone.
Your IP phone may have multiple programmed message buttons, each of which has
different message codes.
- Press any programmed message button. A red light comes on the button’s LED indicates
that the message has been set. Press the button again to clear the message.
- Press another programmed message button to clear the previous message and set the new
message.
NOTE
NOTE
To Next Page