Samsung PL50 - Display Bright; Start up Image; Display SAVE; Quick View

051
Display ( )
If you enable Quick View before capturing an image, you can view
the image you just captured on the LCD monitor for the duration
set in the [Quick View] setup. Quick view is possible only with still
images.
- Sub menus
[Off] : The quick view function can’t
be activated.
[0.5 sec]*, [1 sec], [3 sec]
: The captured image is briefly
displayed during the selected
time.
Quick view
If you set the [Power Save] to On and the camera isn't operated
during the specified time, the LCD monitor will be turned off
automatically.
- Sub menus
[Off]* : The LCD monitor will not be turned off.
[On] : If the camera isn't operated
during the specified time (about 30
SEC.), the camera power will be
idle (Camera status lamp:Blinking)
automatically.
Ä
You can’t set the [Power Save] menu of Playback Mode.
Display SAVE
You can adjust the LCD brightness.
- Sub menus : [Auto]*, [Dark],
[Normal], [Bright]
Display Bright
You can select the image that is first displayed on the LCD monitor
whenever the camera is turned on.
- Sub menus : [Off]*, [Logo], [User Image]
- Use a saved image for the start-up image
with the [Start Image] in the [RESIZE]
menu in the play mode.
- The start-up image will not be deleted by
[Delete] or [Format] menu.
- The User images will be deleted by
[Reset] menu.
Start up image
Back Set
Function Description :On
Start Image :Off
Display Brightness :Auto
Quick View :0.5sec
Power Save :Off
Language :English
Auto
Dark
Normal
Bright
Back Set
Function Description :On
Start Image :Off
Display Brightness :Auto
Quick View :0.5sec
Power Save :Off
Language :English
Off
0.5sec
1sec
3sec
Back Set
Function Description :On
Start Image :Off
Display Brightness :Auto
Quick View :0.5sec
Power Save :Off
Language :English
Off
On
Back Set
Function Description :On
Start Image :Off
Display Brightness :Auto
Quick View :0.5sec
Power Save :Off
Language :English
Off

