Samsung PL50 - Auto Focus Lamp; Setting the USB

056
You can turn on and off the Auto Focus lamp.
- Sub menus
[Off] : The AF lamp will not light up in
low light conditions.
[On]* : The AF lamp will light up in low
light conditions.
Auto Focus lamp
Settings (
”
)
Setting the USB
If the camera is set to connect automatically to a PC or a printer using
a USB cable, you can manually set [Computer] or [Printer].
- [USB] sub menus:
[Auto]* : Automatically enables an ex
-
ternal device connected with a
USB cable.
[Computer] : Sets computer connection
mode if the connected external
device cannot be recognized
automatically.
[Printer] : Sets printer connection mode if the connected external
device cannot be recognized automatically.
Back Set
AF Lamp :On
USB :Auto
Video Out :NTSC
Off
On
Back Set
AF Lamp :On
USB :Auto
Video Out :NTSC
Auto
Computer
Printer