098
Using the USB Driver for MACSetting up the USB Driver for MAC
1. A USB Driver for MAC is not included with the software CD as
MAC OS supports the camera driver.
2. Check the MAC OS version during start-up. This camera is com-
patible with MAC OS 10.3.
3. Connect the camera to the Macintosh and turn the camera power
on.
4. A new icon will be displayed on the desktop after connecting the
camera to the MAC.
1. Double click a new icon on the desktop and the folder in the
memory will be displayed.
2. Select an image file and copy or move it to MAC.
First complete uploading from computer to camera and then
remove the removable disk with the Extract command.
To Next Page
Loading...
