15
Chapter 2. Device setup
TOOLS INFO
SET
UNSET
LOCK
PC
A
DVI
B
HDMI
C
DP
D
EXITRETURN
IR control
Display information about the current input source.
Move to the upper, lower, left or right menu, or adjust an
option’s setting.
Conrm a menu selection.
Exit the current menu.
Manually select a connected input source from PC, DVI,
HDMI or DisplayPort.
Used in Anynet+ mode and multimedia mode.
Quickly select frequently used functions.
Return to the previous menu.
It sets safe lock function.
If multiple products are connected through the Video Wall
feature, press the
SET
button and enter a product ID using
the number buttons. Control the product using the remote
control.
Cancel a value that has been set using the
SET
button and
control all connected products using the remote control.
To place batteries in the remote control
To Next Page
Loading...
