Samsung PM32F

25
Chapter 2. Device setup
Ack
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3 'A' 0x19 “Screen
Size”
“Screen Size”: product screen size (range: 0 – 255, unit: inch)
Nak
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3 'N' 0x19 "ERR"
“ERR” : A code showing what error has occurred.
PIP On/Off control
Function
• The PIP mode of a product can be turned on or off using a PC.
• Only available on models that have the PIP function.
• The mode cannot be controlled if Video Wall is set to On.
• This function is not available in MagicInfo.
Viewing PIP on/off state (Get the PIP ON / OFF Status)
Header Command ID Data length Checksum
0xAA 0x3C 0
Setting PIP on/off (Set the PIP ON / OFF)
Header Command ID Data
length
Data Checksum
0xAA 0x3C 1 “PIP”
“PIP”: A code used to turn the PIP mode of a product on or off
• 1: PIP ON
• 0: PIP OFF
Ack
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3 'A' 0x3C “PIP”
“PIP”: A code used to turn the PIP mode of a product on or off
Nak
Header Command ID Data
length
Ack/
Nak
r-CMD Val1 Checksum
0xAA 0xFF 3 'N' 0x3C "ERR"
“ERR” : A code showing what error has occurred.
Auto adjustment control (PC and BNC only)
Function
• Automatically adjust the PC system screen using a PC.
Viewing auto adjustment state (Get Auto Adjustment Status)
• None