Samsung PM32F

30
Chapter 2. Device setup
You can use the DVI port on the product as a D-SUB port by using a D-SUB-DVI
adapter.
DVI / RGB / MAGICINFO IN
Connection using an HDMI-DVI cable
The appearance may differ depending on the product.
After connecting a computer to the product with an HDMI-DVI cable, make sure
to congure the settings as shown below to enable the video and audio from the
computer.
• Sound → set HDMI Sound to PC(DVI)
• Picture → set each screen mode to Text under Picture Mode
• System → General → set HDMI Hot Plug to Off
HDMI1 or HDMI2
AUDIO IN