50
Chapter 4. Home screen
7 Select the All
8 When the device is approved by the server, the schedule registered in the
•
• If a device is deleted from the list of devices approved by the server, the device
will reboot to reset its settings.
Setting the current time
A schedule may not run if the time set on the device is different from the server’s
1 Select Device
2
3 Select Edit Setup
4 Select Time Zone
using the GMT time of the region where the server is installed.
The time on the product can be changed from the server.
Turning the product off and then on again will restore the time setting on the
product to the last time that was set from the server.
•
To Next Page
Loading...
