Samsung PM32F

66
Chapter 5. Menu
System ▼
2nd 3rd Description
Power On Delay When connecting multiple products, adjust the power-on time for each product to prevent power overload (within
the range 0–50 seconds).
Auto Source Switching Turning on the display with Auto Source Switching On, and the previous video source selection is not active, the
display will automatically search the different video input sources for active video.
Auto Source Switching When the Auto Source Switching is On, the display video source will automatically be searched for active video.
The Primary Source selection will be activated, if the current video source is not recognized.
Secondary Source selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognized, the display will perform two searches for an
active source, each search checking the primary and then secondary source. If both searches fail, the display will
return to the rst video source and display a message indicating that there is no signal.
When the Primary Source selection is set to All, the display will search all the video source inputs twice in sequence
looking for an active video source, returning back to the rst video source in the sequence if no video is found.
Primary Source Recovery Select whether to restore the selected primary input source when a primary input source is connected.
• The Primary Source Recovery function is disabled if Primary Source is set to All.
Primary Source Specify Primary Source for the automatic input source.
Secondary Source Specify Secondary Source for the automatic input source.
DVI Connection Select the source device that is connected to the DVI input.
• Restart the source device if the screen is not displayed.
Power Control Auto Power On This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
PC Module Power The PC module can be turned on/off separately from the LFD.
Max. Power Saving Turns off the product to reduce power consumption after the PC has been left idle for a specied period of time.
• Available only DVI, HDMI, DisplayPort mode.