Samsung ProXpress M456x Series

To Next Page

To Previous Page

4.Troubleshooting

4.5.5.4.Adjustment

PrintAdjustment

•Diagnostics>Adjustment>PrintAdjustment>AutomaticAdjustment

PurposeTocalibrate/adjustthelengthsofvertical&horizontalimageandimagepositionautomaticallyin

printengine.

OperationProcedure

1)Press“PaperSupply”buttonandselectatray.

2)Press“PaperSize”buttonandselectapapersizeofthepreviouslyselectedtray.

3)Press“Print”button.Atestpatternwillbeprintedout.

4)Placetheprintedpatternonplaten.

•Thewords“frontside”onthechartfacetheglass

•Thearrowsfaceleftedgeoftheplaten

•Press“Scan1”

5)Placetheprintedpatternonplaten.

•Thewords“backside”onthechartfacetheglass

•Thearrowsfaceleftedgeoftheplaten

•Press“Scan2”

6)Press“OK”button.Automaticscanningwilloccur.

7)LocatethebacksideofScannerA/SChartatthescannerglassagainandpress“OK”button

oncemore.

8)Thesystemwillautomaticallycalculatethepropervaluebasedonscanningresultofthe

testpattern.

9)Thenewvaluesaresettothesystem.

Samsung ProXpress M456x Series - Adjustment