Loading paper in the tray
51
2. Media and Tray
4
Flex and fan the edge of the paper stack to separate the pages before
loading papers.
5
Load the paper.
6
After inserting paper into the tray, squeeze the paper width guides and
slide them to the desired paper size marked at the bottom of the tray.
• Do not push the paper width guide too far causing the media to warp.
• If you do not adjust the paper width guide, it may cause paper jams.
• Do not use a paper with a leading-edge curl, it may cause a paper jam or
the paper can be wrinkled.
To Next Page
Loading...
