English - 19
Changing the Picture Size
TV
Size
16 : 9
Wide Zoom
Zoom
4 : 3
Just Scan
Move Enter Return
Picture
rMore
Size : Zoom
Digital NR : Auto
Active Colour : Off
DNle : Off
Movie Plus : On
Reset : OK
Move Enter Return
TV
Press the STILL button to freeze a moving picture into a
still one. Press again to cancel.
Freezing the Current Picture
You can select the picture size which best corresponds to
your viewing requirements.
1. Press the MENU button to display the menu.
Press the ENTER/OK button , to select "Picture".
2. Press the
▲
or
▼
button to select "Size", then press the
ENTER/OK button.
3. Select the required option by pressing the
▲
or
▼
button.
Press the ENTER/OK button.
4. Press the EXIT button to exit.
"Wide Zoom" function is available only in"TV", "AV1", "AV2",
"Component1","Component2","HDMI1","HDMI2","HDMI3",
and "S-Video" mode.
(HDMI3 is only available for PS42Q91HD
and PS50Q91HD)
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Just Scan Mode is available only HDMI mode
Zoom: Select by pressing the
◄
or
►
buttons.
Use the
▲
or
▼
button to move the picture up and down.
After selecting , use the
▲
or
▼
button to magnify or
reduce the picture size in the vertical direction.
Wide Zoom : Move the screen up/down using the▲ or ▼
buttons after selecting the by pressing the ►
or ENTER/OK button.
16:9:
Adjusts the picture size to 16:9 appropriate for DVDs or
wide broadcasting.
Wide Zoom:
Magnify the size of the picture more than 4:3..
Zoom:
Magnifies the 16:9 wide picture (in the vertical direction)
to fit the screen size.
4:3:
This is the default setting for a video movie or normal broadcasting.
Just Scan : Displays the input scenes as they are without any cutoff
when 720p, 1080i signals are input.
You can select these options
by simply pressing the P.SIZE
button on the remote control.
To Next Page
Loading...
