English - 57
The following settings are to use Anynet+ functions.
Using the Anynet+ Function
1. Press the Anynet+ button.
Press the ▲ or ▼ button to select Setup, then press the
ENTER/OK button.
2. Press the ENTER/OK button to select Anynet+ (HDMI-
CEC), then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select On, then press the
ENTER/OK button.
The Anynet+ (HDMI-CEC) function is enabled.
If you select Off, Anynet+ (HDMI-CEC) is disabled.
When the Anynet+ (HDMI-CEC) function is disabled, all
the Anynet+ related operations are deactivated.
Turning an Anynet+ Device Off Automatically when the
TV is Turned Off
1. Press the ▲ or ▼ button to select Auto Turn Off, then
press the ENTER/OK button.
2. Press the ▲ or ▼ button to select On, then press the
ENTER/OK button.
The Auto turn off function is enabled.
If you select Off, the Auto turn off function is canceled.
Setting Up Anynet+
PC
Air28
Move Enter
Exit
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver :Off
Setup
Setup
Anynet+ (HDMI-CEC) : Off
Auto Turn Off : Off
Searching Connections
Enter Return Return
Off
On
Setup
Anynet+ (HDMI-CEC) : Off
Auto Turn Off : Off
Searching Connections
Enter Return Return
Off
On
Press the EXIT button to exit.
The Select Device setting of the TV remote control is to be
set to TV to use the Anynet+ function.
If you set Auto Turn Off to On, connected external devices are
also turned off when the TV is turned off.
However, if the device is recording, it may not be turned off.
For installation, refer to the Installation Manual provided.
For product installation and the installation and moving of the wall mount, make sure to consult
a specialized installation company.
This installation manual is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer.
To Next Page
Loading...
