English - 44
You can reset the values stored to the factory default
values.
The Reset operation deletes all channel information
and user preferences returning all values to their default
factory state.
1. Press the D.MENU button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
3. Press the
▲ or ▼
button to select "System", then press
the ENTER/OK button.
4. Press the
▲ or ▼
button to select "Reset", then press the
ENTER/OK button.
5. The "Enter PIN" screen will appear.
6. Enter your current 4-digit PIN code by using the numeric
buttons (0~9).
The warning message is displayed.All values will be
reset by pressing the coloured buttons (red, green,
yellow, and blue)in turn.
7. Press the EXIT button to exit.
Resetting
Reset
Enter PIN
Enter PIN Return
Reset
WARNING: All channel settings and user
preferences will be lost and returned to
the factory defaults. It is recommended
that a reset is performed only when
serious problems are experienced.
Return
Selecting the Preferred Language (Subtitle , Audio)
You can change the default value for subtitle, audio teletext
languages.
Displays the language information for the incoming stream.
1. Press the D.MENU button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Language", then press
the ENTER/OK button.
3.
Press the
▲ or ▼
button to select "Subtitle Language",
"Audio Language".
Press the ENTER/OK button.
4. Select a particular language by pressing the ▲ or ▼ button
repeatedly.
Press the ENTER/OK button.
English is the default in cases where the selected
language is unavailable in the broadcast.
5. Press the EXIT button to exit.
While viewing a programme, the subtitle can be selected.
While viewing a programme, audio languages can be
selected.
Language
Subtitle Language
Audio Language
Move Enter Return
Language
Subtitle Language
Audio Language
Move Enter Return
To Next Page
Loading...
