English - 56
What is Anynet+? (Anynet+ function is only for Q9)
Anynet+ is an AV network system that enables an easy-to-use AV interface for users by
controlling all connected AV devices through the Anynet+ menu when Samsung Electronics AV
devices are connected.
The Anynet+ system supports AV devices supporting Anynet+ only.
Check if there is an Anynet+ mark on the AV device to be connected to the TV.
To directly connect to TV
To connect to Home Theatre
Connect only the optical cable between [Digital Audio Out (Optical)] on your TV and Digital Audio
Input on the receiver.
Connect only one receiver.
You can listen to 5.1 channel sound through the Home Theatre ’s speakers. Otherwise, you can only
listen to 2 channel stereo sound in other cases. Make sure to connect the Digital Audio IN (Optical)
of the Home Theatre and the TV correctly to listen to TV sound through the Home Theatre .
you cannot listen to sound from the BD recorder that is sent to the Home Theatre via the TV in 5.1
channel sound because the TV outputs only 2 channel stereo sound. Please see the manual for the
Home Theatre .
You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support
Anynet+ functions.
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
Anynet+ supports up to 8 AV devices in total.
Connecting Anynet+ Devices
TV
Connect the [HDMI 1], [HDMI2]
or [HDMI 3] jack on the TV and
the HDMI OUT jack of the corre
sponding Anynet+ device using the
HDMI cable.
1. Connect the [HDMI 1], [HDMI 2]
or [HDMI 3] jack on the TV and
the HDMI OUT jack of the
corresponding Anynet+ device
using the HDMI cable.
2. Connect the HDMI IN jack of
the Home Theatre and the HDMI
OUT jack of the corresponding
Anynet+ device using the HDMI
cable.
TV
To Next Page
Loading...
