TV-Viewing Support Functions
Use the functions that are available while watching TV.
Changing the broadcast signal
Live TV Channel List
Press the directional button on your remote control, move the focus to Terrestrial, Cable or Satellite, and then press
the Select button.
You do not need to use this function if your TV is connected to a cable box or satellite box.
The Channel List categories may vary depending on the incoming broadcast signals.
Scanning for available channels
Settings Broadcasting (Auto Tuning Settings) Auto Tuning
This function may not be supported depending on the model or geographical area.
If the TV is connected to a cable box or satellite box, you do not need to do this.
The DVB-T2 system may not be supported depending on the geographical area.
The Auto Tuning Settings may not appear depending on the model or geographical area.
Selecting the cable network search option
Settings Broadcasting (Auto Tuning Settings) Cable Search Option
Sets additional search options such as the frequency and symbol rate for a cable network search.
This function may not be supported depending on the model or geographical area.
The Auto Tuning Settings may not appear depending on the model or geographical area.
- 105 -
To Next Page
Loading...
Need help?
General
