Tuning broadcast signals manually
Settings Broadcasting Expert Settings Manual Scan Try Now
You can scan for all the channels manually and store the scanned channels in the TV.
This function may not be supported depending on the model or geographical area.
Tuning digital channels
Settings Broadcasting Expert Settings Manual Scan Digital Channel Tuning
Select New, and then congure Channel, Frequency and Bandwidth, and then select Search to automatically scan
and store a list of digital channels in the TV.
Tuning analogue channels
Settings Broadcasting Expert Settings Manual Scan Analogue Channel Tuning
Select New and congure Programme, Colour System, Sound System, Channel and Search to scan for analogue
channels. Then, select Store to store the scanned channels in the TV.
This function is only available for analogue broadcasts.
Channel mode
• P (pogramme mode)
When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from
P0 to P99. You can select a channel by entering the position number in this mode.
• C (aerial channel mode) / S (cable channel mode)
These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting
station or cable channel.
- 109 -
To Next Page
Loading...
Need help?
General
