97
2nd 3rd Description
Server Network Settings Connect to Server Connect to MagicInfo server.
"
If you do use the TLS option, the server is configured to use https and data transfer is encrypted. (Port number: 7002)
"
If you don't use the TLS option, enter the server IP address and port number. Use 7001 as the port number. (If you are
unable to connect to the server using port number 7001, check with your server administrator to find the correct port
number and then change the port number.)
"
Enter the server IP address and port number. Use 7001 as the port number. (If unable to connect to the server using port
number 7001, check with your server administrator to find the correct port number and then change the port number.)
"
For the MagicInfo Server user guide, visit the following website: http://displaysolutions.samsung.comSupport
ResourcesMagicInfo Web Manual.
Verify MagicINFO Server Enable this option to block HTTPS communication if the domain name of the MagicINFO Server URL is different from the
domain name of the MagicINFO Server certificate.
MagicInfo Mode Select the appropriate MagicInfo Mode depending on the environment where you are using the product.
"
Supported content types may be limited while MagicInfo Mode is set to Lite.
Server Access Allow or deny access to MagicInfo server.
FTP Mode Specify the FTP operating mode.
Proxy Server Set up your proxy server connection and related functions.
"
Address / Port / ID and Password are enabled only when Proxy Server is set to On.
UEM Setting Configure settings for connection to the UEM (Unified Endpoint Management) server.
Enter the required information by following the guide for the server you want to connect to.
You can view or reset the settings using the "UEM Status" menu.
To Next Page
Loading...
Need help?
General
