Samsung RH48E - Initial Setup Steps; Auto Tuning and Clock Set

114
6
Auto Tuning
-
Aerial: Terrestrial / Cable
-
Channel Type: Digital & Analogue / Digital / Analogue
This feature automatically searches and configures broadcast signals connected to the product.
To configure settings later, press the Stop button.
―
Auto Tuning does not appear if No channels (display only) is selected.
7
Clock Set
Set the current date and time, and then select Next.
8
Device Name
-
User Input / [Signage]Display 1 ~ 6
Select or enter a device name.
This name can be shown on network remote controls over the network.
9
Setup Complete
Congratulations! Setup is complete and you're ready to get started.
To watch TV using the product now, select OK.