5
Assemble Your DeviceGetting Started
Prior to use, it is necessary to
install the SIM card, optional
memory card (not included),
andthe battery.
Remove the Back Cover
1. Use an object, such as a coin, and insert it in
the slot on the back cover lock (1). Turn the lock
counter-clockwise to open the battery cover (2).
Lift the cover up and away from the phone.
2. Use the groove at the top left corner of the cover
(3) to lift the cover up and away from the back of
the phone (4).
Warning: Do not bend or twist the back cover
excessively. Doing so may damage the cover.
Install the SIM Card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card. During activation,
your SIM card will be loaded with your subscription
details, such as your PIN, available optional
services, and others features.
Warning: Please be careful when handling the SIM
card to avoid damaging it. Keep all SIM cards out of
reach of small children.
To install a SIM card:
1. Remove the back cover and battery.
2. Carefully slide the SIM card into the SIM card
slot until the card locks into place.
Make sure that the card’s gold contacts face into
the phone and that the angled corner of the card
is positioned as shown.
Caution: If the card is not inserted correctly, the
device will not detect the SIM card. Re-orient the
card and place it back into the slot if the SIM is
notdetected.
Assemble Your Device
To Next Page
Loading...
Need help?
General
