16
Connecting and Using a Source Device
Read below before connecting the product.
1
Before connecting the product, check the shapes of both ports of the supplied signal cables and
the shapes and locations of the ports on the product and external device.
2
Before connecting the product, make sure you remove the power cords from both the product and
the external device to prevent damage to the product due to a short circuit or over current.
3
After all signal cables have been properly connected, connect the power cords back to the product
and the external device.
4
After connecting is completed, make sure you read the manuals to acquaint yourself with the
product functions, precautions and other information required to use the product properly.
5
To use Max specifications of our products, check the support specifications of the cable version you
use.
―
Connecting parts may differ in different products.
―
Provided ports may vary depending on the product.
Ports
―
The functions available may vary depending on the product model. The colour and shape of parts may
differ from what is shown. Specifications are subject to change without notice to improve quality. Refer to
the actual product.
Port Description
Connects to a PC using a USB cable.
―
This port can only connect to a PC.
Connect to a USB device.
Used to update the software.
Connect to a USB device.
Connect to an audio output device such as headphones or earphones.
HDMI 1
HDMI 2
Connects to a source device using an HDMI cable.
DP
Connects to a PC using a DP cable.
DC **V Connects to the AC/DC adapter.
To Next Page
Loading...
