Samsung S27DG60 S Series - Connecting the Product to a PC as a USB HUB; Connecting the Power

18
Connecting the Product to a PC as a USB HUB
Using the product as a hub, connect and use various source devices with the product at a time.
―
Port names and the number of ports may differ, depending on the model.
―
To detect and start a USB device faster, connect the USB device to the
, port on the
product. The read/write rate will be affected by the USB device and your PC.
―
For USB-related problems caused by OS, drive programmemes or software, please contact relevant
suppliers.
―
With the launch of various USB devices on the market, we cannot guarantee that our products are matched
with all USB devices.
―
For an external mass-storage HDD requiring external power supply, be sure to connect it to a power source.
―
The company is not liable for problems or damages to an external device caused by using an unauthorised
cable for the connection.
―
Some products do not follow the USB standard, and it may cause a malfunction of the device.
―
It is recommended that users use USB devices of 5V/1A or lower.
Connecting the Power
HDMI IN DP IN
1
Connect the power cord to the AC/DC adapter. Then, connect the AC/DC adapter to the DC **V port
on the back of the product.
‒ Rated power consumption for adapters differs depending on the model. Use an adapter that
meets the power consumption specification of the model.
2
Next, connect the power cord to the power outlet.
3
Press the JOG button at the bottom of the product to turn it on.
―
The input voltage is switched automatically.