79
Problem Possible Solution
The connected device
is not displayed.
• Check whether or not the device supports Anynet+ functions.
• Check whether or not the HDMI cable is properly connected.
• Check whether Anynet+ (HDMI-CEC) is set to On in the
System menu.
• Search Anynet+ devices again.
• Anynet+ requires an HDMI connection. Make sure the device
is connected to your product with an HDMI cable.
• Some HDMI cables may not support Anynet+ functions.
• If the connection is terminated because there has been a
power failure or the HDMI cable has been disconnected,
please repeat the device scan.
HDMI Hot Plug
This feature is used to activate the time delay to turn on a DVI/HDMI source device.
• Off / On
Game Mode
When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more
realistic gaming experience by selecting game mode.
• Off / On
―
Precautions and limitations for Game Mode
To disconnect the game console and connect another external device, set Game Mode to Off
in the setup menu.
Reset System
m MENU → System → Reset System → E
This option returns the current settings under system to the default factory settings.
To Next Page
Loading...
