Samsung SC-D6550 - Connecting a Power Source; To Use the AC Power Adapter and DC Cable

ENGLISH
2222
Preparation
Connecting a Power Source
✤ There are two types of power source that can be connected to your Camcorder.
- The AC Power adapter and AC Cord: used for indoor recording.
- The Battery pack: used for outdoor recording.
1. Connect the AC Power adapter to the AC Cord.
2. Connect the AC Cord to a wall socket.
[ Notes ]
■
You must use an AA-E8 TYPE AC Power adapter.
■
The plug and wall socket type may differ according to
your resident country.
3. Connect the DC cable to the DC jack of the Camcorder.
4. Set the Camcorder to each mode by holding down the tab
on the Power switch and turning it to the REC, PLAY, (CAMERA) or
OFF mode.
Power Switch
To use the AC Power Adapter and DC Cable
<CAMERA Mode><OFF Mode>
<PLAY Mode><REC Mode>