Samsung SCD-3083 - Page 13

English_13
●
INSTALLATION
2.
3.
the camera by rotating it anti-clockwise.
Hold the ceiling bracket (located where the arrow points to) and separate it from the main body of
Place the separated ceiling bracket so that the “Front” side faces the area to be monitored
and install it with the M4 tapping screws.
Ceilingbracket
tapping
screw
PanBase
fixation
screw

If

you

want

to

install

the

camera

with

the

ceiling
bracketcombined,fixitusingtwotapping
screws
atthesideofthemainbody
＊
4.
5.
To combine the main body with the ceiling bracket, make sure that the pan base fixation screw
face the opposite side of the “Front” side of the ceiling bracket and rotate it clockwise.
Adjust the camera lens to face the area to be monitored and fix the main body and
the dome cover by aligning the grooves and rotating the body clockwise.
tapping
screw