Installation
BEFORE INSTALLATION
Before installing your camera, you have to read the following cautions ：
•
You have to check whether the location (ceiling or wall) can bear five times the weight of your camera.
•
Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise
it may cause a breakdown or fire.
•
Before installing your camera, you have to adjust the lens focus, zoom, and switch settings.
•
When installing your camera, don’t allow any person to approach the installation site. If you have any
valuable things under the place, move them away.
INSTALLATION
1.
Separate the dome cover by turning anti-clockwise and separate the shield case by pulling from
the camera body.
Latch
Main Body
(Camera)
Unlocking direction
(Anti-clockwise)
Shield Case
Locking direction
(Clockwise)
Dome cover
12_ Installation
To Next Page
Loading...
