▶
If you have trouble operating your camera, r
efer to the following table. If the guidelines do not enable
you to solve the problem, contact an authorized technician.
Troubleshooting
TROUBLESHOOTING
Nothing appears on the screen.
▶ Check that the power cord and line connection between the
camera and monitor are fi
xed properly.
▶ Check that you have properly connected VIDEO cable to the
camera VIDEO output jack.
The image on the screen is dim.
▶ Is the lens stained with dirt? Clean your lens with a soft, clean cloth.
▶
Check the monitor and DVR settings.
▶
If the camera is exposed to very strong light, change the camera position.
The image on the screen is dark.
▶ Adjust the contrast feature of the monitor or DVR.
▶
If you have an intermediate device, set the 75Ω / Hi-z properly.
The camera is not working
properly, and the surface of the
camera is hot.
▶ Check that you have properly connected the camera to an
appropriate power source.
The DAY/NIGHT function does
not work.
Check that
AGC of EXPOSURE SETUP menu is ‘OFF’.
Color is not correct.
▶ Check the setting of WHITE BAL SETUP menu .
The screen fl ickers continually.
▶ Check that the camera is not pointing at the sun.
When coaxial communication is
not available
▶ Make sure that the camera and monitor are installed within
the recommended distance.
▶
Use the video amplifi er equivalent to coaxitron if the
recommended installation distance is exceeded.
PROBLEM
SOLUTION
34_Troubleshooting
To Next Page
Loading...
