CONNECTING TO MONITOR
English_15
Connect the Video OUT port on the rear panel of the camera to a monitor.
with the instrument.
As the connecting method varies with the instruments, refer to the manual supplied
Only connect the cable when the power is turned off.
●
CONNECTION
CONNECTING TO POWER
You can connect power as shown in the following figure.
and specifications before connecting power.
Since power specifications differ depending on the model, make sure to check your model name
Monitor
Camera
Connection
----
Power Input Terminal
PP
PP
PP
PP
PP
PP
*
*
When the resistance value of copper wire is at [20°C(68°F)]
Voltage Drop (V/m)
Copper wire size (AWG)
Resistance ( Ω /m)
As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively
long adaptor output line for connection to the camera may affect the performance of the camera.
Standard voltage for camera operation
：
There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
DC 12V ±10%, AC 24V ±10%
To Next Page
Loading...
