16_ Connection
Connection
•
Coaxial Communications System
• OSD Control method
Using coaxial communications
Be sur
e to connect po
wer only after all the installation is complete.
Note that AC / DC adaptor is not supplied with camera.
Ground should be connected to the GND terminal.
If you set the sensitivity level of the sub menu item (of COAX) to “Low”, you have to
press the MENU/ENTER (OSD KEY) button twice in a row to access the OSD menu.
(To prevent an error by noise from the DVR)
•
CAMERA DVR CONTROLLER
SET MENU/ENTER OSD KEY
UP UP KEY JOYSTICK UP
DOWN DOWN KEY JOYSTICK DOWN
LEFT LEFT KEY JOYSTICK LEFT
RIGHT RIGHT KEY JOYSTICK RIGHT
1234
5678
9 101
112
13
14 15 16
ALARM HDD NETWORK BACKUP REC
DVD RECORDER
REC
ZOOM
MODE
FREEZE
AUDIO
BACKUP
ALRAM
SEARCH
TELE
WIDE VIEW
PRESET
MENU
RETURN
USB
OPEN/CLOSE
DVR
•
: BNC
To Next Page
Loading...
