300m 3C2V(RG-59/U)
450m 5C2V(RG-6/U)
600m 7C2V(RG-11/U)
●
CONNECTION
- Video Cable
The camera's video output port is connected to the monitor with a BNC coaxial cable,
shown below : If the distance between the camera and the monitor exceeds the
recommended maximum, please use an auxiliary video amp.
Distance
Recommended Cable Specification
steel, as this will cause issues with the communication o
ver the coaxial cable.
It is recommended that pure copper coax cable is used and not copper coated
To ensure picture quality, only single-channel video output connector can be
used while camera connected to other video equipments.
English_17
To Next Page
Loading...
