Introduction_ 22
UNDERSTANDING THE STATUS LED
Status LED
The color of the LED indicates the machine's current status.
STATUS LED DESCRIPTION
Off • The machine is off-line.
• T
he machine is in sleep mode.
Green On • The machine is in ready mode or warming up.
Blinking • When the LED blinks slowly, the machine is
receiving data from the computer or printing
documents.
• W
hen the LED blinks rapidly, the machine is
operating special functions.
Red On • T
he inner cover is opened. Close the inner
cover completely.
• T
here is no paper in the tray. Load paper in the
tray.
• T
he machine has stopped due to a major error.
• Your
system has some problems. If this
problem occurs, contact a service
representative.
• A tone
r cartridge has almost reached its
estimated cartridge life
a
a.Estimated cartridge life means the expected or estimated toner
cartridge life, which indicates the average capacity of print-outs and is
designed pursuant to ISO/IEC 19752. The number of pages may be
affected by
operating environment, percentage of image area, printing
interval, media type, and media size. Some amount of toner may
remain in the cartridge even when red LED is on and the printer stops
printing.
. It is recommended to
replace the toner cartridge (See "Replacing the
toner cartridge" on page 89).
Blinking • A small amou
nt of toner is left in the cartridge.
The estimated cartridge life
a
of toner is close.
Prepare a new cartridge for replacement. You
ma
y temporarily increase the printing quality by
redistributing the toner (See "Redistributing
toner" on page 77).
• T
he machine is printing in manual feed mode or
in manual duplex mode.
Orange On A paper jam has occurred (See "Clearing paper
jams" on page 78).
Samsung does not recommend using a non-genuine Samsung toner
cartridge such as one that is refilled or remanufactured. Samsung
cannot guarantee a non-genuine Samsung toner cartridge's quality.
Service or repair required as a result of using non-genuine Samsung
toner cartridges will not be covered under the machine warranty.
All printing errors will appear in the Smart Panel program window. If
the problem persists, contact a service representative.
Wireless LED (SCX-3205W(K) only)
WIRELESS LED STATUS DESCRIPTION
Blue
Off (
)
Wireless network is disconnected.
On (
)
Wireless network is connected.
Slowly blinks
(
)
The machine starts connecting to a
wire
less network.
Fast blinks
(
)
• Th
e machine is connecting to
access point (or wireless router).
• Wi
reless network connection is
being disconnected.
INTRODUCING THE USEFUL BUTTONS
Print Screen button (SCX-3200 only)
If you press Print Screen button for less than two seconds, the green light
blinks fast on the Status LED, and then the machine prints the whole
screen displayed in the monitor.
If you press Print Screen
button for more than two seconds, the Status
LED lights on green, and then the machine prints an active screen
displayed in the monitor.
• The page will be printed on the default page like A4 or Letter.
• Print Screen
can only be used in the Windows and Macintosh
operating systems.
• You can only use this function with a USB-connected machine.
• Yo
u can use this function only when the Smart Panel program is
installed and running.
• Yo
u can only use this function in Eco Print mode off.
Eco Print button
You can turn the Eco Print mode on or off by simply pressing the button. If
you set the Eco Print mode on, the machine automatically sets the 2-UP
and Toner Save option on and print with those options.
1. Pres
s Eco Print button on the control panel.
2. Eco Print LED ligh
ts on. Then, Eco Print mode is on.
To turn off Eco Print mode, press Eco Print bu
tton one more time.
+/- buttons
You can determine the number of copies (up to 99 copies) you want to copy
by pressing +/- buttons. The default setting value is 1.
• If you press +/- buttons briefly, the number of copies
increases/decreases by single digits.
• If yo
u press +/- buttons long, the number of copies increases/decreases
by ten-fold.
WPS button (SCX-3205W(K))
This feature automatically detects which WPS (Wi-Fi Protected Setup™)
mode your access point uses. By pushing a button on the wireless LAN
router/access point and the machine, you can setup the wireless network
and security settings (See "Wireless network setup (SCX-3205W(K))" on
page 36).
To Next Page
Loading...
