Troubleshooting_ 78
into place completely.
6. Close the inner cover and the scan unit completely in order. Ensure that
they are securely closed.
TIPS FOR AVOIDING PAPER JAMS
By selecting the correct media types, most paper jams can be avoided.
When a paper jam occurs, refer to the guidelines below:
• Ensure that th
e adjustable guides are positioned correctly (See "Loading
paper in the tray" on page 50).
• Do not overlo
ad the tray. Ensure that the paper level is below the paper
capacity mark on the inside of the tray.
• Do not remove paper from the tray while your machine is printing.
• Fle
x, fan, and straighten paper before loading.
• Do not use creased
, damp, or highly curled paper.
• Do not mi
x paper types in a tray.
• Use only recommen
ded print media.
• Ensure
that the recommended side of the print media is facing the right
side (See "Loading paper in the tray" on page 50).
• If dupl
exing, print one sheet at a time using Start button (See
"Printing on both sides of the paper (Manual)" on page 56).
• If you are
printing on a special paper, print one sheet at a time using
Start butto
n (See "Manual feeding in the tray" on page 50).
CLEARING PAPER JAMS
If a paper jam occurs, the Status LED on the control panel lights orange.
Find and remove the jammed paper.
To avoid tearing the paper, pull the jammed paper out slowly and
carefully. Follow the instructions in the following sections to clear the
jam.
1 Scan unit
2 Inner cover
In the tray
Click this link to open an animation about clearing a jam.
1. Ope
n the scan unit first, and then the inner cover.
2. Close the inner cover. The jammed paper is automatically ejected from
the machine.
If the paper does not eject, go to the next step.
To Next Page
Loading...
