Introduction_ 23
Stop/Clear button
By pressing Stop/Clear button, you can do the following functions.
FUNCTION DESCRIPTION
Printing a configuration
report
In ready mode, press and hold this button
long enough (about two seconds) until the
Status LED blinks slowly, and release the
button (See "To print a configuration report"
on page 24).
Printing a network
c
onfiguration report
(SCX-3205W(K) only)
In ready mode, press and hold this button for
fo
ur seconds until the Status LED blinks fast,
and release the button (See "Printing a
network configuration report" on page 30).
Supplies information
repor
t
In the ready mode, press and hold this button
for about 6 seconds until the Status LED is
on, and release (See "To print a supplies
information report" on page 24).
Canceling print job
Press
Stop/Clear button during a
operation. The print job is cleared from both
th
e machine and the computer and then the
machine returns to ready mode. This may
take some time depending on the size of the
print job.
Power button
By pressing Power button, you can turn the machine on or off.
Turning on the machine
1. Plug in the power cord.
2. Pr
ess Power button on the control panel.
When the machine is powered on, you can see LED looping on the
displ
ay. Then, the machine is in ready mode.
If you want to turn the power off, press and hold this button for
about two seconds.
To Next Page
Loading...
