Network setup (SCX-3205W(K) only)_ 33
message appears.
• Check if you want to install the software without
connection of the printer.
- Ch
eck this option to install this program without a machine
connected. In this case, the print a test page window will be
skipped, and completes the installation.
• Sear
ch again
When you press this button,
the firewall notice window
appears.
- T
urn off the firewall and Search again. For Windows
operating system, click Start > Control Panel > Windows
Firewall, and inactivate this option.
- T
urn off the firewall from the third party's program beside
the operating system. Refer to the manual provided by
individual programs.
• Direct
Input
The Dir
ect Input allows you to search a specific machine on
the network.
- Search by IP address: Enter the IP address or the host
name. Then click Next.
To verify your machine’s IP address, print a network
co
nfiguration report (See "Printing a network configuration
report" on page 30).
- Se
arch by network path: To find a shared machine (UNC
Path), enter the shared name manually or find a shared
printer by clicking the Browse button. Then click Next.
• Help
If your machine is not connected to the computer or network,
this help
button gives detailed information about the how to
connect the machine.
5. The
searched machine will be shown on the screen. Select the one you
wish to use and click Next.
If the driver searched only one machine, the confirmation window
appears.
6. After the installation is finished, a window asking you to print a test page
appears. If you want to print a test page, click Print a test page.
Otherwise, just click Next and go to step 8.
7. If
the test page prints out correctly, click Yes.
If not, click No to reprint it.
8. If you
want to register your machine on Samsung website, click On-line
Registration.
If your machine is not connected yet to the network, click How to
connect?. How to connect? gives you the detailed information
about the how to connect the machine. Follow the instructions in
the window.
9. Click Finish.
• After the driver setup is completed, you may enable firewall.
• If
your printer driver does not work properly, follow the step below
to repair or reinstall the driver.
a) Ma
ke sure that the machine is connected to your machine and
powered on.
b) From th
e Start menu, select Programs or All Programs >
Samsung Printers > your printer driver name > Uninstall.
c) Select the option as you wish, follow the instruction on the
window.
Macintosh
1. Make sure that the machine is connected to your network and powered
on. Also, your machine’s IP address should have been set.
2. Inse
rt the supplied software CD into your CD-ROM drive.
3. D
ouble-click the CD-ROM icon that appears on your Macintosh desktop.
4. D
ouble-click the MAC_Installer folder.
5. D
ouble-click the Installer OS X icon.
6. En
ter the password and click OK.
7. T
he Samsung Installer window opens. Click Continue.
8. R
ead the license agreement and click Continue.
9. Click Agre
e to agree to the license agreement.
10. Select Ea
sy Install and click Install. Easy Install is recommended for
most users. All components necessary for machine operations will be
installed.
If you select C
ustom Install, you can choose individual components to
install.
11. When
the message which warns that all applications will close on your
computer appears. Click Continue.
12. Select Typi
cal installation for a network printer for a network printer
and then click OK.
13. The SetIP program automatically runs. If the machine has already
configured network information, close the SetIP program.
14. Click OK
to continue the installation.
15. After the inst
allation is finished, click Restart.
16. Open the Appl
ications folder > Utilities > Print Setup Utility.
• For Mac OS X
10.5~10.6, open the Applications folder > System
Preferences and click Print & Fax.
17. Click Add o
n the Printer List.
• For Mac OS X
10.5~10.6, click the “+” icon. A display window will
pop up.
18. For Mac OS X 10.3, select the IP Printing tab.
• For Mac OS X 10.4, click IP Printer.
• For Mac OS X
10.5~10.6, click IP.
19. Select H
P Jetdirect - Socket in Protocol.
When printing a document containing many pages, printing
performance may be enhanced by choosing Socket for Printer
Type option.
20. En
ter the machine’s IP address in the Address input field.
To Next Page
Loading...
