Samsung SCX-4216F - Printer Paper Path

6-2
ALIGNMENT & ADJUSTMENTS
Service Manual
June 2003 WorkCentre PE16
6.1.1 Copy & Scan Document Path
6.1.2 Printer Paper Path
1) After receiving print job, the printer feeds the printing paper from the cassette or manual feeder.
2) The fed paper passes the paper feeding sensor. (Jam 0 occurs if the sensor is not operated after certain
time passes)
3) The paper passes the paper feeding sensor moving to the paper exit sensor via printing process. (Jam
1 occurs if the sensor is not operated after a certain time passes)
4) The paper passed the paper exit sensor moving out from the set. (Jam 2 occurs if the sensor is still
operated after a certain time passes.)
Scanner Part
CCD-Module
White-SheetWhite-Sheet
1
2
3
4
8
5
6
7
5
6
7
Sensor - Scan
Sensor - Regi
Feed Roller
8
Exit Roller
1
2
3
4
Doc. Paper (30 Sheets)
Pickup Roller
ADF Roller
Sensor - Doc.
Engine Part
1
2
3
4
Paper Input (Cassette)
Paper Input (Manual Feeder)
Paper Out (Face Down)
5
6
7
Paper Empty Sensor (Cassette)
Paper Feeding Sensor
Paper Exit Sensor
Paper Empty Sensor (Manual)
PTL
P
I
C
K
/
R
PR
CR
DR
SR
TR FR
OPC
L S U
Fuser
Toner Cartridge
1
2
3
4
5
6
7