6-7
ALIGNMENT & ADJUSTMENTS
Service
Manual
WorkCentre PE16 June 2003
6.2.2.2 JAM 2 (In the Paper Exit Area)
1) Open and close the front cover.The jammed paper
automatically exits the machine.
If the paper does not exit,continue to Step 2.
2) Gently pull the paper out of the front output tray.
3) If there is any resistance when you pull the paper or
the paper is not seen in the front output tray,open the
rear cover.
4) Remove the jammed paper by gently pulling it
straight out.
5) Close the rear cover.
6) Open and close the front cover to resume printing.
To Next Page
Loading...
