Samsung SCX-5835 Series - Erasing Background Images; Shifting Margins; Changing the Default Copy Settings

Copying_ 7
1. Place a single original face down on the scanner glass and close the
scanner lid. Or load the originals face up in the document feeder. (See
"Loading originals" on page 1.)
2. Pr
ess Copy from the main screen.
3. Pr
ess the Image tab > Edge Erase.
4. Select th
e appropriate option.
•Off:
Disables this feature.
•Bo
rder Erase: Erases equal amounts on all edges of the copies.
•Small Orig
inal Erase: Erases 6 mm (0.25 inches) from the edge of
the copies. The original must be placed on the scanner glass to use
this feature.
•Ho
le Punch Erase: Erases hole punch marks from the left edge of the
copies.
•Bo
ok Center and Edges Erase: Erases shadows of a binding or book
edge from the center and side edges of the copies. This feature only
applies when you do copying a book. (See "Book copying" on
page 6.)
If you have set the Book Copy option to Off, you cannot use Book
Center and Edge Erase.
5. Press OK.
6. Pr
ess Start on the control panel to begin copying.
Erasing background images
This feature is helpful when copying originals containing color in the
background, as in newspapers or catalogs.
1. Loa
d the originals, face up, in the document feeder. Or place a single
original face down on the scanner glass and close the scanner lid. (See
"Loading originals" on page 1.)
2. Pr
ess Copy from the main screen.
3. Pr
ess the Image tab > Erase Background.
4. Select th
e appropriate option.
•Off:
Disables this feature.
•Auto: Optimizes the background.
•Enhance:
The higher the number is, the more vivid the background is.
•Era
se: The higher the number is, the lighter the background is.
5. Pr
ess OK.
6. Pr
ess Start on the control panel to begin copying.
Shifting margins
You can secure a room for binding by shifting the margin of a page.
1. Place the originals face up in the document feeder. Or place a single
original face down on the scanner glass and close the scanner lid. (See
"Loading originals" on page 1.)
2. Pres
s Copy from the main screen.
3. Pre
ss the Image tab > Margin Shift.
4. Select Marg
in Shift option.
•Off: Disables this feature.
•Auto Cente
r: Adjusts centers of the paper copy automatically. The
original must be loaded on the scanner glass to use this feature.
•Custom Margin: Adjusts the margin of the left and right, top and
bottom
as you want using arrows. This option supports both on the
scanner glass or in the document feeder.
5. Pres
s OK.
6. Pres
s Start on the control panel to begin copying.
CHANGING THE DEFAULT COPY SETTINGS
If you want to copy always in the same setting, adjust the default copy
settings at once. See "Changing the default settings" on page 3.